SQUARING SAW BENCH FOR WOOD HOLZMANN TS250F1600 230V
The TS 250F-1600 is a simple and intuitive high quality product. The product mounts a 3100W single-phase motor that allows the Ø250mm blade to reach 3600rpm.
If the saw bench is used for a few hours and not at its maximum power, the motor will deliver a power of 3100W (S6), while if the saw bench is used continuously for several hours and at its maximum capacity, the power delivered by the motor will drop and will be equal to 2200W (S1).
The maximum cutting length of the blade is 1400mm. The blade can be tilted up to 45 ° having a cutting height equal to 60mm, while when the blade is set at 90 ° the cutting height is equal to 80mm. When the blade is placed on the parallel guide it has a maximum cutting width of 590mm.
The TS 250F-1600 is equipped with a 760x350mm cast iron work table, placed at a height of 865mm from the ground, and a 1650x238mm aluminum sliding table. The Holzmann saw bench is equipped with extensions for the work table on the right of 300x760mm and the rear of 280x400mm.
The product has a removable parallel guide equipped with a locking system for more stable and precise work. It is also equipped with a blade cover with a suction hose attached so that if you connect a vacuum cleaner it is possible to keep the work surface free of chips and residues, moreover the blade cover is very important for the safety of the operator.
Its weight is 154kg.
Extension for work table of 210x400mm
Removable parallel guide
Work table extension on the rear and on the right side
1400mm cutting depth
Motor power (S6)
Motor power (S1)
Motor power supply
230V - 50Hz
Sliding table dimensions
Right extension of the worktop
Worktop rear extension
Worktop height from the ground
Cutting width with guide
Cutting capacity at 90 °
Cutting capacity at 45 °
TCT saw blade Ø250mm
Sliding table in aluminum 1600x238mm
Work table extensions 300x760mm - 280x400mm